BWI FAMILY OF BRANDS ▼
  Brown & Watson Brown & Watson
  Brown & Watson Power Management Brown & Watson
  Brown & Watson Automotive Accessories Brown & Watson
  Brown & Watson Automotive Offroad Lighting Brown & Watson
  Brown & Watson Motorcycle Electronics Brown & Watson
  Brown & Watson Motorcycle Accessories Brown & Watson
  Brown & Watson Outback Offroad Lighting Brown & Watson
  • 0
  •  
    USD | en
  • 0
  •  
    USD | en

How to Aim Your LED Driving Lights from Vision X Lighting

Proper aiming is essential to get the best performance from your driving lights. Correct alignment improves visibility and ensures safe operation without blinding oncoming traffic.

Vision X Off-Road Lighting provides this proven, industry-standard method for properly aligning Auxiliary LED driving lights for optimal visibility and performance.

 

What you will need?

  • Flat, level ground
  • A vertical wall or garage door
  • Measuring tape
  • Masking tape

Steps One: Position the Vehicle

Place the vehicle upright on level ground, 25 feet from a flat, vertical surface. Ensure both beams can be projected clearly a garage door is a suitable option.

 

Steps Two: Measure Light Height 

Measure from the ground up to the center point of the light pods (H).

 

Steps Three: Create the Reference Line

Using tape, create a horizontal line on the wall 2 inches below the measured height (H - 2”).

 

Steps Four: Adjust the Lights

Loosen the mounting and hinge bolts, then adjust each light so the center of the hotspot aligns with the tape line on the wall. Ensure both lights are evenly aligned on either side of the vehicle’s centerline.

 

Result: Your Vision X Off-Road lights are now correctly aligned for maximum visibility and safe performance.