Ford Bronco LED Lighting Outfitting Guide
junio 02 2025
The Ford Bronco is an icon of off-road adventure on its own, but it gets even better when you outfit it with LED lighting kits from Vision X Lighting. Whether you're blazing trails after dark or cruising through the city, Vision X LED driving lights and fog lights will illuminate the road ahead and make sure you're seen from every angle. Vision X is your go-to source for off-road lighting, including fog lights, driving lights, LED light bars and high-output auxiliary lighting. Here are some of our most popular LED lighting upgrades for the Ford Bronco.
Featured Off-Road Lighting Kits & Accessories for Ford Bronco
FRONT VIEW
(1) 40" Unite Roof Light Bar (Universal) - SHOP UNITE
(2) Ford Bronco A-Pillar / Ditch Light Kit - XIL-OEA21FB
(3) Ford Bronco Modular Front Bumper Kit - XIL-OESB21FB
(4) Ford Bronco Fog Light Kit - XIL-OESBF21FB
REAR VIEW
(6) Ford Bronco Reverse / Spare Tire Light Kit - XIL-OEV21FB
Vision X Outfitting Guide for the Ford Bronco 6G (2021+)
Featuring DURA PRO and CR-PRO Series Lighting Kits
The 6th Gen Ford Bronco is purpose-built for exploration—whether you're crawling over boulders, tearing down fire roads, or heading off-grid for the weekend. To match its off-road DNA, Vision X has developed a full suite of lighting solutions specifically for the Bronco platform, offering two rugged, high-performance options: the DURA PRO and CR-PRO series.
Whether you're looking for a cost-effective lighting upgrade or maximum performance with advanced features, Vision X has a direct-fit solution that meets your needs.
Direct-Fit Lighting Kits for Every Adventure
All Vision X Bronco kits include:
- Vehicle-specific brackets (laser-cut & powder-coated)
- Your choice of DURA PRO or CR-PRO lights (varies per kit)
- Modular upfitter wiring harnesses with dual-circuit control
- Optional integration with OEM upfitter switches or aftermarket systems
A-Pillar Light Kit
Best for: Trail lighting, ditch lights, corner visibility
Mounts directly to the Bronco’s factory a-pillar points to provide wide-angle lighting where you need it most.
Why It’s Great:
- No drilling—uses factory bolt points
- Adjustable brackets for light aiming
- Supports DURA PRO or CR-PRO lights for the performance level you want
Modular Bumper Light Kit
Best for: Long-range visibility, night runs, high-speed terrain
This kit mounts low and forward on the Bronco’s modular bumper (not compatible with Capable Bumper), offering exceptional forward projection.
Why It’s Great:
- Flush, low-profile mounting
- Clean OE+ styling with hidden wiring
- Choose CR-PRO for superior throw or DURA PRO for the square lighting style
Fog Light Replacement Kit
Best for: Legal fog performance, weather visibility, clean install
Replaces OEM fog lights (select trims) with either the DURA PRO or CR-PRO, offering vastly improved output and beam control.
Why It’s Great:
- SAE-compliant fog beam option available
- Bolts into stock fog location—no cutting
- Plug-and-play with OEM connector or included harness
- Combo of Selective Yellow and White Output Kit
- CR (Round), DURA Pro (Square), and SAE XPL Light Bar Options
Spare Tire Reverse Light Kit
Best for: Rear-facing illumination, chase light, reversing
Using a custom spare tire bracket, this kit adds utility lighting out back—perfect for camp setup, reversing in low light, or trail repairs.
Why It’s Great:
- Uses spare tire carrier mounting points
- DURA PRO 6 wide flood beam for maximum coverage
- DURA PRO 2 for bright yet discreet package
Easy Integration with OEM or Aftermarket Switches
Modular upfitter harnesses are included with each lighting kit to ensure a quick & easy installation even for the most inexperienced installers! To wire the light kits directly to the Ford Bronco upfitter switches simply follow option one above to plug in the lights, ground to the fame, and crimp to the pre-wired upfitter leads under the hood; it's really that easy!
To run more powerful lighting setups (that exceed the factory fuse value) follow option two which uses an upfitter harness + our universal trigger relay to pull power from the battery but still use the upfitter switch to control the lights. This option can also be used to trigger the lights via any other source light the vehicle high-beam or an auxiliary switch of your choice!
All kits are compatible with:
- Factory upfitter switches (standard on Badlands, Wildtrak, etc.)
- Aftermarket control systems like sPOD, Switch-Pros, or Garmin Power Switch
-
Vehicle high beam or any auxiliary switch of your choice (using or Universal Trigger Relay)
Available Upfitter Harnesses
(A) Single Light, 3-PIN DT: for DURA PRO & CR PRO Series Lights - P-HARNESS.1UP
(B) Two Light, 3-PIN DT: for DURA PRO & CR PRO Series Lights - P-HARNESS.2UP
(C) Two Light, 2-PIN DT: for CR Base or any 2-wire driving lights - P-HARNESS.2UP2
(D) Four Light, 3-PIN DT: for DURA PRO & CR PRO Series Lights - P-HARNESS.4UP
(E) Six Light, 3-PIN DT: for DURA PRO & CR PRO Series Lights - P-HARNESS.6UP
(NOT SHOW) Six Light, 2-PIN DT: for CR Base or any 2-wire driving lights - P-HARNESS.6UP2
(F) Universal Trigger Relay W/ 40A Fuse: add to any upfitter harness to pull current from the battery and switch the lights via any trigger or switch of your choice. - P-HARNESS.UPRL
Built for Bronco. Backed by Vision X.
The Ford Bronco 6G has earned its reputation as an off-road icon. With Vision X outfitting kits, you can match that capability with lighting that’s just as tough. Whether you go with the budget-friendly DURA PRO or step up to the feature-rich CR-PRO, you’ll get a rugged, reliable, and road-ready lighting solution built to keep up with your adventures.
New Lights, New Mounts, New Adventures
Continue reading to learn more about our band new DURA PRO and CR PRO off-road driving lights that are featured in our Ford Bronco kits!
DURA PRO Series
The DURA PRO series delivers powerful, reliable lighting in a compact square form factor and a unique DRL glow mode—perfect for drivers seeking rugged performance that won't break the bank. LEARN MORE
Key Benefits:
- Dual Beam Technology - All on Driving & DRL Mode
- SAE Compliant DRL Mode
- Oversized Mixed TIR Optics
- Square - Low-profile design ideal for tight spaces
- Selective Yellow Lens Option
CR-PRO Series
The CR-PRO series takes things up a notch with an industry leading output, a multi-function DRL, and Modular X-Lens System that allows you to modify the beam and change the beam color on the fly. It’s designed for drivers who want the best performance, maximum visibility, and signature lighting styling. LEARN MORE
Key Benefits:
- Highest Performance Driving Beam
- Multi-Function Dual Beam Technology + DRL - Full Spot, Combo Driving, DRL Mode
- Modular X-Lens System for Multi-Color, Multi-Beam Performance
- Oversized TIR Optics
- DrySeal Construction - IP68/69K Waterproof & Dustproof Rated
- Round housing for a classic, aggressive look
0 comentarios