Vision X Announced as Official Lighting Partner of CFMOTO

We're beyond proud to announce that Vision X is now the official lighting partner of CFMOTO — and honestly, this partnership couldn't feel more right. Two brands that refuse to compromise on performance, two brands that believe premium capability shouldn't come with a premium penalty. When CFMOTO came knocking, we knew immediately this was exactly the kind of collaboration we'd been built for.

Why CFMOTO? Because They're Doing Something Special.

If you haven't been paying attention to CFMOTO lately, it's time to take a second look. What they've accomplished in a relatively short time in the North American market is genuinely impressive. Their UFORCE U10 side-by-side is a masterclass in delivering real utility without asking customers to empty their wallets to get there. We're talking electronic power steering, a 4,500 lb. synthetic-rope winch, Hill Descent Control, locking differentials, an 8" CFMOTO RideSync™ touchscreen, Apple CarPlay, and a 150-amp charging system — all standard. The top-tier Highland trim even throws in factory-installed HVAC, power glass windows, and automotive-grade tempered glass doors. For the price point, it's almost unfair to the competition.

Then there's the all-new ZFORCE Z10. CFMOTO didn't just build a sport side-by-side — they built a statement. The Z10 is powered by a 998cc turbocharged triple-cylinder engine producing 154 horsepower and 107 lb-ft of torque, paired with FOX® QSE 2.5" piggyback reservoir shocks with in-cab electronic compression adjustment, 17 inches of front travel and 20 inches of rear, and a 12.3" RideSync™ MMI touchscreen with Apple CarPlay and a backup camera. The two-seat Z10 starts at $19,999. That's a turbocharged, FOX-suspended, Apple CarPlay-equipped sport UTV for under $20k. CFMOTO is raising the bar on what customers should expect from the factory, which is exactly why the signature Vision X lighting packages were created.

Why Vision X? Complete Solutions is What we Do! 

We've been at this since 1997. For nearly three decades, Vision X has been pushing the limits of what off-road LED lighting can do — from pioneering advanced optic designs to developing some of the most durable, highest-output lighting solutions available anywhere. Our engineering team doesn't just design lights; they obsess over every optic, every seal, every bracket; and that's just the beginning. Our experience designing complete accessory solutions compatible across multiple vehicle platforms in no small feat, and we take every detail as an opportunity to innovate. That relentless commitment to innovation is exactly what CFMOTO recognized when they chose us as their lighting partner.

The DURA PRO: DRL Done Differently

The DURA PRO light kits available for the CFMOTO U10 and Z10 aren't your typical bolt-on pods. Our clever dual-circuit design repurposes the elliptical flood optics to double as an oversized, SAE J2087-compliant daytime running light — delivering a genuinely useful feature without adding cost or complexity. The included three-way harness lets you effortlessly switch between DRL mode, full intensity mode, and off. In DRL mode, the elliptical LEDs run at 15% intensity for a street-legal, all-day running light that won't blind oncoming traffic. Flip to full intensity and all optics fire simultaneously, delivering a combination of a tight penetrating spot beam and a wide elliptical flood that blankets the terrain around you.

Our DrySeal™ construction robotically seals the lens and internally pots the cable entry for 100% submersible waterproof performance — even with connectors removed. Four-millimeter thick powder-coated steel brackets and a 21g vibration rating mean these lights can take whatever the trail throws at them. The DURA PRO 6 7-LED roof kit for the Z10 puts out over 35,000 raw lumens while maintaining a low-profile factory appearance. Overbuilt? Absolutely. Overpriced? Not a chance.

Explora Light Bars: Unlimited Customization, Zero Compromise

If the DURA PRO is our workhorse, the Explora is our Swiss Army knife. The Explora lighting kits available for the CFMOTO U10 and Z10 represent a completely new breed of off-road light — purpose-built for riders who want their machine to look and perform exactly the way they envision it.

Every Explora light features a switchback dual-color DRL that can run in white, amber, or switchback mode, where the white DRL automatically switches to amber and flashes in sync with your factory turn signal. That's not just a lighting trick — it's genuine functional versatility in one housing.

Beyond that, the Explora system is built around customization at every level:

• Swappable lens covers — every Explora ships with a smoked lens that swaps to clear for protection or selective yellow for dusty conditions. Snap, done.
• Modular silicone trim rings — our industry-first colored rubber trim rings wrap completely around the outer lens, transforming your lighting from aftermarket to OEM-matched. Rings are available in black, red, green, blue, orange, yellow, and pink. If your CFMOTO is wearing a color, we can match it.
• Internal relay with modular switching — no external relay needed. The internal MOSFET makes wiring clean and simple whether you're using our plug-and-play harnesses or wiring it yourself.

A Complete Lighting System, Built from the Ground Up

One of the things we're most proud of in this partnership isn't just the lights themselves — it's the depth of the system we engineered specifically for CFMOTO. This wasn't a case of pulling existing products off the shelf and calling it a kit. We developed a full range of purpose-built mounting solutions to cover every position on the vehicle, so CFMOTO owners can build exactly the setup they want.

For the U10 and Z10, that means A-pillar light kits, front bumper light kits, and roof light kits — each designed with precision-fit brackets that bolt directly to the vehicle without modification. The roof kits are where things get especially serious: we engineered configurations running up to seven DURA PRO 6 pods across the roofline, delivering over 30,000 raw lumens of forward-facing light. That's not a light bar — that's a wall of light. Whether you're working late on the ranch or running trails long after dark, that kind of output changes the way you interact with the terrain.

Just as importantly, we engineered OE-integrated plug-and-play wiring harnesses and switching for every kit in the lineup. Every harness is designed to connect cleanly to the CFMOTO's existing electrical architecture — no cutting, no splicing, no guesswork. The switching integrates cleanly into the cab so the install looks and feels like it came from the factory. That level of electrical integration is something we take seriously, because the best lights in the world mean nothing if the wiring is a mess.

Stronger Together 

CFMOTO builds machines for riders who demand more and expect to pay less for it. Vision X builds lights for riders who refuse to settle for "good enough" when it comes to visibility and style. It's a natural fit — and we're thrilled to make it official.

Whether you're putting a DURA PRO kit on your Z10's bumper for the dunes or decking out your U10 with cargo lighting, you can trust that the engineering behind every Vision X light was done with the same obsessive standard that CFMOTO brought to the vehicles themselves.

We can't wait to show you what this partnership produces. Stay tuned.

— The Vision X Team